BJGTR - Y 500 RUSTMASTER ENAMEL-DIL HIGH GLOSS 5950

  • MSDS: BJGTR
  • Manufacturer: GLIDDEN COMPANY SCM CORP
  • Product Name: Y 500 RUSTMASTER ENAMEL-DIL HIGH GLOSS 5950
  • National Stock Number: 8010-00F012948
Product Identification

Product ID:Y 500 RUSTMASTER ENAMEL-DIL HIGH GLOSS 5950
MSDS Date:11/17/1989
FSC:8010
NIIN:00F012948
MSDS Number: BJGTR

Responsible Party
GLIDDEN COMPANY/SCM CORPORATION
925 EUCLID AVENUE
CLEVELAND, OH 44115

Emergency Phone: (216) 826-5566

Info Phone: (216) 826-5566

Cage: EO697

Contractor
GLIDDEN PAINT, ICI PAINTS NORTH AMERICA
CLEVELAND, OH 44115 US

Telephone: 800-545-2643/216-344-8207

Cage: 01PD6

Ingredients

HYDROTREATED LIGHT DISTILLATE, PETROLEUM; C12-C15

CAS: 64742-47-8

Fraction By Weight: 18%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


MAGNESIUM ALUMINUM SILICATE

CAS: 8031-18-3

Fraction By Weight: 2%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 19%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


1), CALCIUM CARBONATE,

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 12%

ACGIH TLV: 10 MG/CUM


MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

Fraction By Weight: 9%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


HYDROTREATED LIGHT DISTILLATE, PETROLEUM; C12-C15

CAS: 64742-47-8

Fraction By Weight: 11%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


ALKYD RESIN

CAS: 68459-17-6

Fraction By Weight: 10%


FATTY ACIDS, C18-UNSATD, DIMERS, POLYMERS

CAS: 68604-95-5

Fraction By Weight: 13%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF RESPIRATORY
TRACT, FATIGUE, DIZZINESS, HEADACHE, CNS DEPRESSION, ANESTHETIC
EFFECT, NARCOSIS, UNCONSCIOUSNESS, UNCOORDINATION,
ASPHYXIATION/DEATH. SKIN: IRRITATION/DERMATITIS /DEFATTING/BLURRED
VISION. EYES: IRRITATION/BLURRED VISION/TEARING. INGESTION:
VOMITING/DIGESTIVE SYSTEM PROBLEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: REPEATED/PROLONGED OVEREXPOSURE TO
SOLVENTS CAUSES PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. INTENTIONAL
MISUSE BY DELIBERATELY CONCENTRATING/INHALING THE CONTENTS MAY BE
HARMFUL OR FATAL. LAR GE AMTS MAY CAUSE LUNG INFLAMMATION/DAMAGE
DUE TO ASPIRATION OF MATERIAL INTO LUNGS. INHALATION: ASTHMA-LIKE
CONDITIONS.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE/SUPPORT BREATHING.
GET MED ATT. SKIN: WASH OFF QUICKLY W/PLENTY OF WATER, THEN SOAP &
WATER. REMOVE/WASH CONTAMINATED CLOTHING BEFORE RE-USE. EYE: FLUSH
W/LARG E AMOUNTS OF WATER, ESPECIALLY UNDER LIDS FOR AT LEAST 15
MINS. OBTAIN MED TREATMENT. INGESTION: OBTAIN MEDICAL TREATMENT
IMMEDIATELY.

Fire Fighting

Flash Point Method:SCC
Flash Point:110F
Lower Limits:0.7%
Extinguishing Media:DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER MAY BE USED TO COOL & PROTECT EXPOSED
CONTAINERS. VOLATILES IN AIR THAT WILL PRODUCE A FLASH OF FIRE WHEN
AN IGNITION SOURCE IS PRESENT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT OR FIRE. VAPOR CAN FORM EXPLOSIVE MIXTURES
IN AIR AT ELEVATED TEMPERATURES.

Accidental Release

Spill Release Procedures:COMPLY W/ALL APPLICABLE HEALTH/ENVIRONMENTAL
REGULATIONS. ELIMINATE ALL SOURCES OF IGNITION. VENTILATE AREA.
EVACUATE ALL UNNECESSARY PERSONNEL. LARGE SPILLS-SHUT OFF LEAK IF
SAFE TO DO SO. KEEP SALVA GE MATERIAL/RINSE WATER OUT OF
SEWERS/WATER COURSE

Handling

Handling and Storage Precautions:STORAGE <100F. USE ONLY W/ADEQUATE
VENTILATION. DON'T TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
AVOID CONTACT W/SKIN, EYES/BREATHING OF VAPORS.
Other Precautions:WASH HANDS THOROUGHLY AFTER HANDLING, ESPECIALLY
BEFORE EATING OR SMOKING. KEEP CONTAINERS TIGHTLY CLOSED/UPRIGHT
WHEN NOT IN USE. IF SANDING IS DONE, WEAR A DUSTMASK TO AVOID
BREATHING OF SANDING DUS T.

Exposure Controls

Respiratory Protection:WHERE RESPIRATORY PROTECTION IS REQUIRED, USE
ONLY NIOSH/MSHA APPROVED RESPIRATORS. IF SANDING IS DONE, WEAR A
DUSTMASK TO AVOID BREATHING OF SANDING DUST.
Ventilation:PROVIDE MECHANICAL/LOCAL EXHAUST VENTILATION TO PREVENT
BUILD-UP OF VAPORS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:EYE WASH, SAFETY SHOWER
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING,
ESPECIALLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health
WT/GAL: 9.71

Chemical Properties

Boiling Pt:B.P. Text:308-386F
Percent Volatiles by Volume:57.92

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, BASES, AMINES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, ELEVATED
TEMPERATURES, SOURCES OF IGNITION. STORAGE <100F.
Hazardous Decomposition Products:CO, CO2, TOXIC GASES.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ALL APPLICABLE
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS. HAZARD CLASS:
COMBUSTIBLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.